Isocratic Pump for electrochemical detection :: ESA – a Magellan biosciences company
Print this page

Isocratic Micro-Displacement Pump for EC detection

Optimized for HPLC electrochemical detection with the Coulochem III detector. The ISO-3100BM biocompatible pump offers pulse-free solvent delivery – even at micro-flow-rate ranges below 50 μl/min – and offers the following features and benefits:

Dual parallel plungers – provide low pulsation and greater seal life
Micro-volume plunger displacement – 25 µL per plunger stroke, improves limits of electrochemical detection
Flow rate range of 0.001 - 2.5 mL/minute – can be used in analytical, microbore, and LC-MS separations
Automatic seal wash – prolongs plunger seal life for greater reliability
Enhancement package – for reduced noise and lower limits of detection with all HPLC detectors
Electronic diagnostics – for easier maintenance
Improved fluidics – more reliable and easier to maintain
High accuracy and precision – for greater reproducibility

This isocratic pump is recommended for high sensitivity electrochemical detection with the Coulochem III and CoulArray series detectors.

Specifications

Pump: Micro-volume dual-piston pump (25 µL/stroke)

Modes of solvent delivery: Constant flow or constant pressure solvent delivery

Flow-rate range: 0.001 to 2.5 mL/minute (2 to 413 bar)

Flow-rate accuracy: ±0.5%

Flow-rate precision: 0.3% maximum (RSD: 0.1% maximum)

Compressibility compensation: Fully automated, independent of the composition of the mobile phase

Damper (internal): Internal capacity of approximately 0.8 mL

Materials in contact with mobile phase: Titanium, zirconium oxide (ZrO2), ruby, sapphire, aluminum oxide (Al2O3), PEEK, PTFE, ECTFE, FEP, UHMW polyethylene, Teflon

Pressure accuracy: < or 0.02 mPa, whichever is greater

Communications:
All functions controllable via USB (USB 1.1 or 2.0)
Integrated USB hub with three USB ports (USB 1.1 or 2.0)

Safety features Leak sensor, active rear seal wash system, excess pressure monitoring

Size: 16.5" (W) x 6.3" (H) x 20.1" (D) (160 mm x 420 mm x 510 mm)

Weight: 22 lbs (12.8 kg )

Power requirements: 100-120V, 60 Hz; 200-240V, 50 Hz; max. 150 VA

Environmental conditions: Range of use: Indoor use; temperature: 10 °C to 35 °C (50 to 95°F); air humidity: 80% relative humidity, non-condensing; overvoltage category: II; pollution degree: 2